Recent Posts

Pages: [1] 2 3 ... 10
1
What is your OMSI setup?


I use a Wheel and Pedal set(Logitech Driving Force Pro)
It's good, but I'd like a wheel specifically for OMSI.
I kinda have an Idea to create a wheel set made to look like a bus dashboard.
But usually the ones I've seen online are custom ones made from actual dashboards, which is expensive to do.


I few problems I have with my wheel is that it only goes 90 degrees(Though it says 900)
, the wheel does that "Jump" while steering and sometimes I confuse the keys.


I usually just have my set in my room, but sometimes I'll move my desktop tower, keyboard and mouse to my
living room to play on the TV. And I just have it sitting in front of the TV and use a bench from my kitchen's table set to
sit the wheel on and move my computer chair.


What are your thoughts? What are your experiences with your setup as well?
2
What type of computer do you use? And how is your overall experience with it on a daily basis and with some games?


For me, I have both. My desktop is from 2015 and it uses an AMD-10 Quadcore processor.
It works great for everyday use, and plays anime visual novels.


It struggles with newer 3D Games though, OMSI plays good, but lags on big maps unless settings are tuned.
The same is said with ATS and ETS2.


I bought my laptop for school specifically, but does it's job. Though I've noticed that my copy of Windows 10 lags where
a school computer with the same OS doesn't.


I don't even try to play ATS or ETS2 at all. However, OMSI does work but I don't use it for playing. I just use it for my projects.


Note: Be sure to also check out my other poll, info about why will be in it.
3
Add-On Maps / Re: Cayuga Midwest 0.1 (Beta Released)
« Last post by Transitbusguy on July 17, 2018, 04:51:43 PM »
i can only drive the 9 line up to like 19th st and the map doesnt load. I used map tools and im not missing nothing
4
Add-On Maps / Re: Cayuga Midwest 0.1 (Beta Released)
« Last post by CTA_FlxibleFan on July 17, 2018, 09:30:01 AM »
which ones are the Manly splines and scenery objeccts?

Chuckinos objects and Splines fall under Manly Act 2.
5
Add-On Vehicles / Re: ElDorado National XHF
« Last post by ANIME-AND-BUSES on July 15, 2018, 05:51:41 AM »
Hey Everybody! Sorry for not updating the topic for a while, been busy working on my mods, and Life.
Especially since today I'm got my driver's license! Yay!


So this is kinda a small update, I've mostly been working on the 35' foot model since it's the model that is already in OMSI. Therefore, my progress is mostly creating the UV Maps, tracing them on Paint.NET, coloring them, doing my best at shading, and exporting the models for OMSI.


On the 35' model, I created the textures for the exterior, interior, cockpit and front doors. I also lowered my bus model,
which took a long time doing as I had to save each part as a new file with the new height. And because of that, I'm also gonna have to make the wheels a bit smaller as they now look too large.

Hey looking good!
Thanks :)
6
Add-On Vehicles / Re: ElDorado National XHF
« Last post by Mta_Donny on July 15, 2018, 01:06:22 AM »
Hey Everybody! Sorry for not updating the topic for a while, been busy working on my mods, and Life.
Especially since today I'm got my driver's license! Yay!


So this is kinda a small update, I've mostly been working on the 35' foot model since it's the model that is already in OMSI. Therefore, my progress is mostly creating the UV Maps, tracing them on Paint.NET, coloring them, doing my best at shading, and exporting the models for OMSI.


On the 35' model, I created the textures for the exterior, interior, cockpit and front doors. I also lowered my bus model,
which took a long time doing as I had to save each part as a new file with the new height. And because of that, I'm also gonna have to make the wheels a bit smaller as they now look too large.

Hey looking good!
7
Add-On Maps / Re: Cayuga Midwest 0.1 (Beta Released)
« Last post by The Lycanroc Gamer on July 14, 2018, 03:46:29 PM »
which ones are the Manly splines and scenery objeccts?
8
Add-On Vehicles / Re: ElDorado National XHF
« Last post by ANIME-AND-BUSES on July 14, 2018, 03:39:53 AM »
Hey Everybody! Sorry for not updating the topic for a while, been busy working on my mods, and Life.
Especially since today I'm got my driver's license! Yay!


So this is kinda a small update, I've mostly been working on the 35' foot model since it's the model that is already in OMSI. Therefore, my progress is mostly creating the UV Maps, tracing them on Paint.NET, coloring them, doing my best at shading, and exporting the models for OMSI.


On the 35' model, I created the textures for the exterior, interior, cockpit and front doors. I also lowered my bus model,
which took a long time doing as I had to save each part as a new file with the new height. And because of that, I'm also gonna have to make the wheels a bit smaller as they now look too large.
9
Add-On Vehicles / Grande West Vicinity
« Last post by The Lycanroc Gamer on July 13, 2018, 09:39:26 PM »
So.......this is the offical forum of the Grande West Vicinity.


If anyone begs for it; I won't release it at all!
If anyone ask about the process: I don't know how to use blender
And if anyone wants to be a beta tester: give a reason why. I'm selective with beta testers because I don't want some complete smart guy to release the unfinished model and I get complaints


And I DON'T ACCEPT DONATIONS. Why? I feel like my work should be for those who want it.
10
Add-On Maps / Re: Cayuga Midwest 0.1 (Beta Released)
« Last post by CTA_FlxibleFan on July 11, 2018, 11:26:26 PM »
Logfile,
Having problems with map and definitely could use some help.

So one thing I noticed is

Error:           In "Sceneryobjects\Power Lines\Power_Line_2.sco" there was an error in line 27!
8377 8:32:35 PM -  -     Warning:       Invalid Object: Sceneryobjects\Power Lines\Power_Line_2.sco"

Also 8153 8:11:53 PM -  -   Error:           Fehler bei Bereichsprüfung: AMUAV.CNAVO.MV.C
8154 8:11:53 PM -  -   Error:           You want to create vehicle  - it is invalid!
8155 8:11:53 PM -  -       Information: Try placing random bus:

Now for the first one that object It has been hit or miss with some users I don't if that could be the source of your troubles now as for issue number two, I would suggest changing the AI list to a different bus to see if that will correct anything wrong which in this case is the DBC new flyers.
Pages: [1] 2 3 ... 10

Powered by EzPortal